Storage & Shelf Life
FlameGuard Pure Silicone Tape should be stored at room temperatue (70°F) and between 30 to 50% relative humidity. Storage at over 125°F can result in a reduction of bond strength and adhesion when used. Shelf life is recommended at 4 years from batch date on packaging.
Specifications for FlameGuardä ABST-ROR-24-20
Rectangular Profile Silicone Tape (MIL-I-46852 Type I & A-A-59163 Type I) |
Property |
Standard |
Test Result
or Tolerance |
Test Method |
Thickness |
.020" (20 mil) Uniform |
+/- .002" |
|
Width |
1.50" |
+/- .050" |
|
Length |
36 feet |
+/- 6.00" |
|
Color |
Oxide-Red |
N/A |
|
Guideline Color |
N/A |
N/A |
|
Operating Temperature |
-60ºC to +260ºC
-76ºC to +500ºF |
|
|
Shipping Weight |
330g / 11.6oz |
|
|
Brittle Temperature |
-65ºC / -85ºF |
|
|
Interleave Material |
.002" thick Mylar |
|
|
Tensile Strength |
700 psi (minimum) |
1100 |
ASTM D412 / D119 |
Dielectric Strength |
400 V/mil (.001") |
575 |
MIL-I-46852
MIL A-A-59163
ASTM D-149 |
Dielectric Constant |
|
2.94 @ 1KHz |
ASTM D150 |
Resistance |
|
3 x 1014 ohms/cm3 |
MIL-I-46852 |
Elongation |
300% (minimum) |
700 |
ASTM D412 / D119 |
Tear Strength |
85 psi (minimum) |
146 |
ASTM D624 |
Bond Strength (1" width) |
2 lbs (minimum) |
5.5 |
MIL-I-46852
ASTM D2148 |
Adhesion |
Shall not unwind more
than 1.0" after 3 minutes
with 600g load |
0.12" |
ASTM D2148 |
Inclined Mandrel Tack Test (inch) |
|
0.25 |
ASTM D2148 |
Water Absorption (by wt) |
3% (maximum) |
0.9% |
MIL-I-46852 |
Dissipation Factor |
|
<0.0004 @ 1 KHz |
ASTM D150 |
Hardness, durometer
Shore A |
55-65 |
55 |
ASTM D2148
ASTM D2240 |
FlameGuardä Pure Silicone Tape
for Aviation, Automotive, Marine,
Industrial & Electrical Use.
Non-flammable & self-extinguishing.
High-Temperature FlameGuardä Pure Silicone Tape
We recommend Microsoft
Internet Explorer for
best results on this site.
We Accept:
The proprietary silicone formulation provides optimal thermal dispersion.
FlameGuard
Pure Silicone Tape is
Self-Fusing / Self-Bonding
and non-flammable.
11/08
Available in a 1" and
1.5" wide tape.
Each roll contains
432" / 36' / 10.9m of tape.
Specifications & Standards
FlameGuardä Pure Silicone Tape meets many or
all of the specifications of the following standards:
MIL-I-46852, MIL A-A-59163, TYT-200-1, P36728, TBFT201-36, NSN 5970-00-177-1627.
FlameGuardä Pure Silicone Tape may also be certified to the following upon request (fees apply):
MIL-I-46852C Type I & II, A-A-59163 Type I & II, MIL-I-22444C, Boeing DMS2186 Type I & II, Lockheed Martin MMS J517 & 5-00857, General Electric A50A493 / A50E112 / P5384, Rohr RMS315, FAR 25.853, UL / CSA.
COLORS
1" wide tape is available
in Oxide-Red & Black
1.5" wide tape is available in Oxide-Red only
PRICING
ABST-TOR-16-20
ABST-TB-16-20
1" wide x 36 feet,
triangular profile.
$21.93 USD per roll
ordered on-line.
(List Price $33.00 USD)
ABST-ROR-24-20
1.5" wide x 36 feet, rectangular profile.
$37.43 USD per roll
ordered on-line.
(List Price $47.00 USD)